mengatasi the ink cartridge has been installed or replaced

Simply remove the black cartridge, then the color cartridge. HP 21/22, HP 27/28, and HP 56/57 Cartridges – Several printer models using the listed cartridges may inte rmittently display this error “circuit error” when the color cartridge is replaced.Then re-install the cartridges in same order. A fix is to remove the black cartridge first and then the color cartridge. Some HP models using the 21/22, 27/28, or 56/57 may display the “check cartridge” or “replace cartridge” error when the color cartridge is replace. Print at least once a week to keep ink flowing through the cartridge nozzles.You may have to run the cleaning cycle several times to get the desired results. Use the print head cleaning utility on your printer.This will wick ink out of the cartridge and may restart ink flow. Press the print head against a damp paper towel.Take the following steps to avoid/correct clogged print heads: When cartridges are used infrequently or stored for long periods before being used ink residue dries in the nozzles and prevents clear, crisp printing. Poor print quality is usually caused by clogged print head nozzles. Check the contacts for ink and clean if necessary.Remove tape from the bottom, pulling it up toward the contacts). Make sure the tape has been removed (be careful to not touch copper contacts.Sometimes errors can become stuck in cache requiring a reboot. Check for ink residue and clean with cotton swab, cue tip and distilled water or alcohol. In this case the cartridge will have to be replaced. Print head tape (blue tape) covering the print head and contacts hasn’t been removed.Cartridge errors that prevent your cartridge from printing such as “incorrect cartridge”, “cartridge error”, or “replace cartridge” accompanied flashing LEDs on the printer may be caused by one of the following:

Mengatasi the ink cartridge has been installed or replaced